- Maximum sheet size: 1060 × 750 mm
- Minimum sheet size: 450 × 380 mm
- Max die cutting size: 1040 x 720 mm
- Inside chase: 1120 x 760 mm
- Sheet thickness: 80 g up to 5 mm – Corrugated board B flute
- Maximum pressure: 300 t
- Minimum gripper margin: 8 mm
- Maximum speed: 7500 sheets/hour
- Max. pile height at feeder: 1600 mm
- Max. pile height at delivery: 1350 mm
- Total Power: 22 kW
- Dimension (L×W×H): 5870 × 5050 × 2525 mm
- Machine weight: 19 t
PDF106E IS AN AUTOMATIC HIGH SPEED DIE CUTTING MACHINE EQUIPPED WITH A BLANKING UNIT. IT IS THE IDEAL MACHINE FOR BIG RUNS.
FOR 700×1000 mm FORMATS AND STOCKS FROM 80 g UP TO 5 mm AND CORRUGATED BOARD B FLUTE.
It can carry out standard jobs such as cutting, creasing, perforation, kiss cut.
In addition to the mechanical characteristics of PDF106, this machine is equipped with a blanking unit, to eliminate the waste frame of the die cut sheet.
The blank is pushed down on a lower (female) chase by an upper (male) chase.
The finished blank is neatly stacked on a pallet. This process is repeated until the specific number
of blanks has been piled up.
Remaining wastes are sent to a non-stop collecting system and dropped into a waste basket for
There is a paper inserter section to insert an interposing sheet between the shape piles to separate
batches and give a better support on the pallet.
The blanking unit can be changed over to a normal waste stripping unit and the die cut product
can be collected in the delivery unit.
This group is provided with a paper inserter function in order to insert an interposing sheet between
the piled up shapes, to separate batches and prevent paper sliding.
Non-stop stacking at exit. Carton boxes can be cleaned and piled up properly.
WORKING FLOW WITH BLANKING FUNCTION ON
Working flow during blanking operations.
WORKING FLOW WITH STRIPPING FUNCTION ON
Working flow during stripping operations.